Classification: Chemical Auxiliary Agent
CAS No.: 8002-74-2
Other Names: Hydrocarbon wax
MF: CnH2n+2
EINECS No.: 232-315-6
Purity: 99% min
Place of Origin: China
Type: chemical auxiliary agent
Fischer Tropsch Wax For making PVC candles color master batch
Fischer Tropsch (FT) wax is a synthetic wax produced by wax oil that made in the coal to oil unit . The wax oil is distilled to separate the mixture into fuels products and waxes with melting points ranging from about 52 - 115ºC.
Speedchem provides the most comprehensive choice of synthetic Fischer-Tropsch (FT) waxes ranging from low (52°C) to very high melting point (115°C).The form is prills and color is white.
Property | Unit | Method | WL-115
| WL-108 | WL-70 | WL-60 |
Melt point | °C | GB/T8026 | 113-117 | 108-113 | — | — |
Freezing point | °C | ASTMD938 | 102-108 | 97-103 | 68-78 | 56-68 |
Color | saybolt | GB/T3555 |
》+15 | 》+15 | 》+15 | 》20 |
Needle penetration | 0.1mm | GB/T4985 | <1 | <2 | W8 | W25 |
Oil content | % | GB/T3554 | <0.5 | <1 | W2 | W5 |
1.PVC processing: F.T wax can effectively reduce the plasticizing torque; extend the plasticizing and thermal stability time. As the external lubricant of PVC processing, the lubricant is better than PE wax and paraffin wax,compare with PE wax,the dosage can be reduced by 30%. Used in outer-lubricant in the process of PVC profile, pipe fitting and plastic molding. It improves the toughness of plastics products and makes smooth surface, high rate of pass, better plasticizing efficiency.
2.Heat melting adhesive: F.T wax with the characteristics of narrow distribution of MW, high melting point, low viscosity, fast solidification, has good compatibility with EVA resin and petroleum resin, has good thermal stability, will not change color in a few hours under 180°C baking. Suitable to be used in hot melt coating, can replace the imported products.
3.Color master batch(Used as inner-dispersant in color master batch process) F.T wax with narrow distribution of MW,odorless, suitable for master batch, it has very good Wettability with pigments and fillers, and can reduce the viscosity of LDPE resin, can significantly reduce the processing current in production, so it can save energy.
4. Used as dispersant in ink and paint industry. Better anti-sedimentation makes better gloss and stereo sense.
5. In rubber industry, it can improve the surface brightness and smoothness after products taking off the membrane, reduce the dosage of paraffin wax and reduce the production cost.
6. Widely used in wax products, for example, floor wax, car wax, polish wax, candle etc. It can improve the softening point, strength and surface gloss.
Advantage: Higher softening point, low viscosity
Package: 25Kg/Bag
Storage: It should be in the original package, preserved in dry place at room temperature, avoid direct sunlight and water.